Zubuntu 1.0 Rc1

[Kirin]

no luck on sound .... i went into alsamixer, and flip everything that listed as mm to the opposite setting.

A restart won't help either...  help...... :-(

[same]

no luck on sound

jeh, run alsamixer as cortez said, then use the right arrow and go to the end, after one hundred column' devices you'll see "Speaker" "column" in my case must be > 90 to hear some sound

[Kirin]

oh wow, you guys are the best!!!! Thanks, now my zubuntu is fully functioning, woo hoo!

[2dBH]

no luck on sound

jeh, run alsamixer as cortez said, then use the right arrow and go to the end, after one hundred column' devices you'll see "Speaker" "column" in my case must be > 90 to hear some sound

Hi Same

It seems you are able to run pdaxii13 on HD of SL-C3200 and zubuntu on SDHC. This is precisely what I want to do, but I have failed. I got Kernel panic: no init found ...

Can you give some hints on the installation? e.g. what is in your kernel-cmdline? Thanks in advance.

pdaxii13 (akita) on HD SL-C3200.

[speculatrix]

I unmuted every sound output, turned volume up to max and I get no sound out of the speaker

and then on a hunch, I plugged the headphones in, and guess what! no sound either.  

[same]

2dbh: i use the kexec way from debian andromeda. for me it's enough

speculatrix: check my amixer reply, u could compare with yours http://pastebin.com/f6c97c80

[speculatrix]

2dbh: i use the kexec way from debian andromeda. for me it's enough

speculatrix: check my amixer reply, u could compare with yours http://pastebin.com/f6c97c80

woohoo! yes, I  found the right and left mixers were disabled, now I have sound. thanks ever so much!

[Kirin]

Is there any battery monitor app that you guys will recommend?

And what applications did you guys use on Zubuntu?

[apink]

Is there any battery monitor app that you guys will recommend?

And what applications did you guys use on Zubuntu?

awk ' {print $7}' /proc/apm

[same]

i use xbattbar
added the following command to /root/.xinitrc before the launch of desktop:
xbattbar -a -t 2 -i darkorange -I green -o black -O black -p 15 right > /dev/null &
it paints a 2 pixels bar to the right of the screen, when charging is green, discharging darkorange. it's a small program.

[2dBH]

2dbh: i use the kexec way from debian andromeda. for me it's enough

speculatrix: check my amixer reply, u could compare with yours http://pastebin.com/f6c97c80

This is a really good suggestion. Thanks a lot! I will try it soon.

[canguy247]

Hey all,

Any chance someone could post the dm9601 module for this kernel?  

Thanks,
Canguy

[Chero]

Just been reading the full thread.

Should have done that before asking stupid questions in other threads ...

Sorry,
Having fun with Zubuntu,
Chero.

[pasteur]

Help me!!  

I have installed zubuntu 1.0 on my zaurus c-1000. When I insert wifi cf card, my zaurus behaves like "I don't know what this card is.". The card's led doesn't even blink!! (just turned on)

Typing "pccardctl ident" :
Socket 0:
  product info: "IPOne", "AirGate2000C", "Version 01.02", ""
  manfid: 0x0713, 0x0002
  function: 6 (network)

"pccardctl info" :
PRODID_1="IPOne"
PRODID_2="AirGate2000C"
PRODID_3="Version 01.02"
PRODID_4=""
MANFID=0713,0002
FUNCID=6

"pccardctl ls" :
Socket 0 Bridge:        [pxa2xx-pcmcia]         (bus ID: pxa2xx-pcmcia)
Socket 0 Device 0:    [-- no driver --   ]         (bus ID: 0.0)

On Yonggun's latest debian kernel  and pdaxrom beta1~3, the card worked perfectly.
I think this problem caused by missing of proper driver.

WHAT SHOULD I DO???

[same]

Help me!!  
...
WHAT SHOULD I DO???

try sudo modprobe hostap_cs
or the driver that debian use, if the command allows the card to be detected, do a
echo hostap_cs >> /etc/modules to force module load at startup

edit: thnx ofels, fixed the error