 To Extract Battery, what happens |
  |
 Feb 9 2005, 03:42 AM
Post
#1
|
|
|
Group: Members Posts: 6 Joined: 20-January 05 Member No.: 6,274  |
Hi,
Help me please. I upgrade my zaurus with a new rom and I copied updater.sh, initrd.bin, zImage.bin on my SD card. these are the steps I followed: I reset the zaurus , I Closed the battery cover, and move the Lock Switch to the Lock position I Pressed ON Key while pressing OK key I Selected "4. Update" by using cursor keys and push OK key I selected Sd medium I saw the Zaurus updater which display percentage of kernel and flash (initrd) update At 100% Zaurus tell me the success of update and reboot. At this point Zaurus is off, but It doesn't reboot . It remain off . I tried to push any button (on/off) for first but it remains off. After this I extracted the battery and put it newly. What happens if the battery is extracted? I tried to update with my old rom on CF card, but I have the same result. Zaurus seems died. Help me . I don't know what can I do. Michele |
 |
 
|
|
Feb 9 2005, 03:54 AM
Post
#2
|
|
|
Group: Members Posts: 626 Joined: 13-April 04 From: Ireland Member No.: 2,825 |
First off what machine are you using?
If's its a cxxx machine, there is a switch on the back. |
|
|
|
|
Feb 9 2005, 05:10 AM
Post
#3
|
|
|
Group: Members Posts: 4,515 Joined: 25-October 03 From: Bath, UK Member No.: 464 |
QUOTE What happens if the battery is extracted? A hard reset. Make sure they power cable isn't attached though if you want to do a hard reset (I'd try this now). When you start it up again you may need to hold down the on/off switch (on the back/outside, not the Home key on the inside) for a fairly long time until it boots. It may also boot with the back-light off (it'll come on once it wakes up) so you can't actually see that it's alive. Si |
|
|
|
|
Feb 13 2005, 11:16 PM
Post
#4
|
|
|
Group: Members Posts: 73 Joined: 8-February 05 From: Mexico Member No.: 6,436 |
i had teh same problems, i downloaded cacko 1.16 to 1.18 roms, and those never loaded. The OPIE roms loaded ok, but i used the latest rom from cacko the 1.22 and now my zaurus is working perfect.
|
|
|
|
|
Feb 14 2005, 02:59 AM
Post
#5
|
|
|
Group: Members Posts: 6 Joined: 20-January 05 Member No.: 6,274 |
QUOTE(seinfield @ Feb 14 2005, 09:16 AM) i had teh same problems, i downloaded cacko 1.16 to 1.18 roms, and those never loaded. The OPIE roms loaded ok, but i used the latest rom from cacko the 1.22 and now my zaurus is working perfect.  I'm using zaurus sl5600, cacko rom is not for sl5600. I can upgrade to sharp rom or opie 3.5.2 and from cf or sd card . THis is what appens and what I saw: ZAurus CF updater RO file systms Flash erasing ..dine 0% 100% ........................... success .... rebooting. The screen go off and at this point zaurus is died. I press on/off button but zaurus doesn't up. I can only reset and to repeat the same operation to upgrade. MIchele |
|
|
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
|
Lo-Fi Version | Time is now: 18th May 2013 - 03:14 PM |