OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio

IPB

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Prisim Ii, Poodle, And Oz 3.5.3, wireless connection issues
green_e320
post Feb 15 2007, 06:47 AM
Post #1





Group: Members
Posts: 1
Joined: 28-May 05
Member No.: 7,221



Trying to get "current" to prolong the useful life of my Z as long as possible and ran into a problem with the wireless connectivity which I cannot resolve.

poodle/PXA250 2.6.11 kernel - OZ 3.5.3
Ambicom WL 1100C-CF wireless card
NICID: id=08x800c v1.0.0 (PRISM II (2.5) PCMCIA (SST parallel flash))
PRIID: id=0x0015 v1.1.0
STAID: id=0x001f v1.4.9 (station firmware)

Immediate wireless router is an older SMC 7004AWBR (hence broadcasting SSID) and I have numerous other devices connected to it wirelessly and via ethernet just fine. WEP is off and no filtering by MAC going on in SMC while I try to resolve this.

With 2.4 kernel, original SHARP ROM and also qtopia 2.1.2 the wireless in this hardware configuration connected and worked.

After upgrade, Z sees wireless networks, appears to connect both with manual connection and by finding networks and selecting...light locks on, picks up channel and SSID -- although sometimes SSID is scrambled). Not really connected as it will not get IP address via DHCP and cannot ping wireless router from OPIE console.

When I provide Z a manual address (in range, non-dup...), same appearance of connecting but not pingable from network and network not reachable from OPIE console.

It seems almost like WEP is on but the Z hasn't the key to connect.

I hesitate to try to flash CF card, as I know it works.

Any thoughts?

Thanks in advance.
Go to the top of the page
 
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



RSS Lo-Fi Version Time is now: 23rd November 2014 - 03:06 AM