Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - mibry

Pages: [1] 2 3 ... 5
1
Sorry I can't be more help.

I must admit, however, I'm having a great time with Stretch/Gemini. I use my Cosmo for my phone, so the Gemini is just for a Linux laptop.

I hadn't turned on my Gemini in a year, and now I'm using Gemian all the time. My poor Netwalker... This is what the Netwalker should've been.

Jake

Have a look here: https://github.com/gemian/gemian/wiki/DebianBuster.

That might help with upgrade to buster.

Regards

Mibry

2
Cosmo Communicator - Linux / Re: Cannot boot UBPorts / SailfishOS
« on: April 14, 2021, 05:32:43 am »
I used this one:

https://gitlab.com/ubports/community-ports/android9/planet-cosmocom/planet-cosmocom/-/pipelines/284408889

I used the rootfs.img from the flashable and the boot.img from the build and worked fine for more.

Regards

Mibry

3
Cosmo Communicator - Linux / Re: Cannot boot UBPorts / SailfishOS
« on: April 14, 2021, 12:10:04 am »
A new Ubports build is available.

4
Cosmo Communicator - Linux / Re: Anbox on Cosmo Linux
« on: April 07, 2021, 08:18:15 am »
Please post steps.

5
Cosmo Communicator - Linux / Re: phosh on Gemian
« on: February 17, 2021, 04:34:58 pm »
It may be possible but Mobian uses bullseye (Debian 11) code base and gemian is based on Debian buster (debian 10).

PureOS the original version of Debian phosh was created on from Librem is based on buster so might be worth a try.

Regards

Mibry

6
Cosmo Communicator - Linux / Re: Battery/Power Conservation Strategy
« on: January 31, 2021, 08:58:51 pm »
So, I appear to be having a few issue with the custom kernel (cosmo-linux-kernel4.4).   The Codi display stays stuck at the planet logo once mobile data is enabled / Network Manager is removed. Also, I am unable to answer calls via the open cosmo screen by pressing accept.  Any one else dealing with this?

Outside of that the power usage seems to be ok.  I started using the device today around 9am with moderate usage and I am at about 32% usage now at about 17:29PM.

I haven’t uninstall network manager. Try and reinstall Network Manager, if I remember correctly codi needs Network Manager installed.

Great to see that power saving is improved.

Regards

Mibry

*edit was to remove unneeded words.

7
Cosmo Communicator - Linux / Re: Battery/Power Conservation Strategy
« on: January 30, 2021, 11:54:57 pm »
Let's us know how you go with the new kernel and if it improves powering saving, it would be good to get a comparison. If I can get decent power saving I will start to use gemian as my daily.

Regards

Mibry

8
Cosmo Communicator - Linux / Re: Battery/Power Conservation Strategy
« on: January 30, 2021, 04:30:22 pm »
Have a look at the guide that @AdamBoardman put together.

https://github.com/gemian/gemian/wiki/KernelCompilation

Regards

Mibry

9
Cosmo Communicator - Linux / Re: Battery/Power Conservation Strategy
« on: January 28, 2021, 05:32:43 am »
The packing kernel includes some extra modules that I wanted. Also includes some tweaks that seem to help.

10
Cosmo Communicator - Linux / Re: Battery/Power Conservation Strategy
« on: January 27, 2021, 04:37:18 pm »
I did a test last night with my Cosmo, in standby over 9 hours the battery went down only 30%. I made the following changes:

-install tlp and ran tlp start before going into standby
-installed cpufreq and set governor to powersave (sudo cpufreq-set -g powersave)
- Turned off Wifi
- Compiled new kernel from gemian github site using the packaging branch.

I hope this info is helpful.

Regards

Mibry

11
Cosmo Communicator - Linux / Re: Ubports for Cosmo
« on: January 24, 2021, 11:37:17 pm »
Codi is now working with the latest build of ubports. I have been running it for the last 2 days.

Great work from Notkit and Adam Boardman.

12
The codi-app is is installed to /home/cosmo/.config/autostart/codi.desktop, you have to copy the same file to the same location of the user you created.

13
Cosmo Communicator - Linux / Re: Ubports for Cosmo
« on: November 05, 2020, 07:46:07 pm »
I don't believe it is a good idea to use recovery slot 2. From what has been said on the telegram group is that slot 2 does not have access to the modem. Someone on the telegram group created a script to change the boot images between Sailfishos, Gemian and Ubports using the Planet recovery install custom OS option. I will see if I can find it and post it here.

14
Cosmo Communicator - Linux / Ubports for Cosmo
« on: November 05, 2020, 02:13:16 am »
There has been quite a bit of work on a ubports port for the cosmo.
To install ubports on the cosmo you will need linux installed, I will not explain that in this post as there are instruction on Planets website.

Download the latest flashable zip file (Will be named artifacts.zip) from https://gitlab.com/ubports/community-ports/android9/planet-cosmocom/planet-cosmocom/-/pipelines.
Unzip artifacts.zip, 2 files will be unziped to a new folder call "out". The files will be called rootfs.img and boot.img.
cd to the out folder and move the rootfs.img file to / and rename it to ubuntu.img
next flash the boot.img to one of the free boot slots using the following command "dd if=~/out/boot.img of=/dev/disk/by-partlabel/boot4 <- the last part will need to be changed to reflect you boot slot.

Next reboot and select the boot slot with ubuntu touch. Then follow the setup instructions.

Thanks go to @TheKit for working on Ubports for cosmo.

15
Cosmo Communicator - Linux / Re: donations to linux dev
« on: September 13, 2020, 11:29:17 am »
I agree. I would be happy to contribute toward a fund, we need to ensure that the fund is managed by someone.

Pages: [1] 2 3 ... 5