[new] Kernel 2.6.24.4 With Cpufreq

[gsgmx]

Dear 2or0, I would like to ask you for a vmlinux version of your kernel.

I am testing a kexec backport for linux arm 2.4, hoping to make it work on the sharp rom.
Unfortunately, it doesn't work with bz kernel images, only with uncompressed images.

So could I ask for a vmlinux version of your latest kernel? (sharp bootloader, hda1 version)

Thank you in advance!

Here is vmlinux for kernel 2.6.24.3. Good luck!
 [ Invalid Attachment ]

would a SD version of this kernel work on my cacko 1.23 C1000?
Or would i need an other2.4.20 kernel for cacko in NAND too?

As far as i understand the discussion here, the 2.4.x sharp/cacko Cxxxx could kexec a vmlinux kernel on an SD which also has a root fs.

So a debian EABI started from SD by a running cacko might become an option soon?

George

[matthis]

To 2or0: Thank you very much for you quick reply and help!! I will report back on any progress.
(Sorry I replied so late I was busy looking for a job.)

Edit1: for the moment things are not looking good  
After loading the kexec module, "cat ./vmlinux > /proc/kexec" segfaults... will have to look into it.

[malik]

@2or0> may i ask for a vmlinux sd version of your kernel to test things parallel to matthis? thanx...

[speculatrix]

Hi! Thanks to new version!!

I have 802.11g CF WLAN card(PLanex GW-CF54G) and now it worked!!

http://nokamoto.blogspot.com/2008/01/zauru...x-gw-cf54g.html

that sounds very promising! I'm off to ebay to see if I can get hold of one. Is that driver going to be back-ported to kernel 2.4, so that it'd be possible to use it with Cacko do you think?

--edit--
looks like it's still in beta
http://projects.linuxtogo.org/projects/marvell8385/

[ZDevil]

that sounds very promising! I'm off to ebay to see if I can get hold of one. Is that driver going to be back-ported to kernel 2.4, so that it'd be possible to use it

lol ... I'm ahead of you already ... now awaiting to receive my new cheap toy

--edit--
looks like it's still in beta
http://projects.linuxtogo.org/projects/marvell8385/

Or this?
http://www.handhelds.org/moin/moin.cgi/How...d7836d0329f8ef6

[2or0]

The kernel 2.6.24.4was built with cpufreq patch. I added the autofs4 module to auto-mount SD and CF card.
http://yonggun.tistory.com/72

[ZDevil]

Thanks! I really like the new look of your laZy blog...  

[2or0]

Thanks! I really like the new look of your laZy blog...  

Thank you, It is spring.  

I posted simple howto about mounting the SD and the CF card using autofs4 module. Check my blog, please.

Enjoy~

[ArchiMark]

2or0,

Is it possible to get a hda2 version of your new kernel?

Thanks,

Mark

[malik]

@2or0 and matthis> is it necessary to have a special vmlinux kernel version to kexec debian from sd
within a nand cacko installation or can i try/use the above vmlinux version?

is there a way to extract vmlinux from a bzimage?

[ZDevil]

I posted simple howto about mounting the SD and the CF card using autofs4 module. Check my blog, please.
Enjoy~

Just flashed the hda1 kernel. Very smoothie. Cool.

The autofs module comes so timely! With this I won't miss the matchbox panel applets anymore. This also removes one of the last barriers in my little desktop project. I've created applets for them but it's one for each (CF/SD/USB), which is far from optimal.

[speculatrix]

so, we've all got use to 2.6.24 and now 2.6.25 has been released!
http://kernelnewbies.org/Linux_2_6_25

[2or0]

2or0,

Is it possible to get a hda2 version of your new kernel?

Thanks,

Mark

I uploaded it. Try it please.

[ArchiMark]

2or0,

Is it possible to get a hda2 version of your new kernel?

Thanks,

Mark

I uploaded it. Try it please.

That was quick, 2or0 !

Just installed it, works well so far...

THANKS!

Mark

[matthis]

Thank for the new kernel 2or0!
Works very well.