OESF | ELSI | pdaXrom | OpenZaurus | Zaurus Themes | Community Links | Ibiblio


Welcome Guest ( Log In | Register )

Reply to this topicStart new topic
> Help: C750 Went Toes-up ... For No Reason?
post May 1 2006, 10:34 PM
Post #1

Group: Members
Posts: 4
Joined: 1-May 06
Member No.: 9,745

Help! My C750 went toes-up today, and I'm suffering information overload after spending the past evening scouring the net to figure out if it's recoverable.

I have a ~3-year-old SL-C750, purchased through dynamism.com, still running the original Sharp ROM. I know, loading a better ROM was on my list of things to do, but having kids threw off my plans.

Anyway, it's worked great so far. For the past several months, the scroll-wheel has been acting up. It acts like the spring on the top has come loose--there's no resistance to keep the wheel from moving up towards the power button. Moving it down still encounters a push-back that returns it to center. It wouldn't boot if the wheel wasn't centered, so I simply got in the habit of lightly holding the wheel in the right position when turning it on. Oddly enough, the problem was somewhat intermittent. Occasionally, for no apparent reason, the top 'spring' (or whatever is in there) would work again for some period of time.

For the past several days, the email light has been blinking, even when there was no calendar alarm up. After puzzling over that, I just ignored it.

Battery charging seems to have been working fine. I usually plug the PDA into the (original) charger each evening when I come home, but it's usually good for several days even if I don't. This weekend it wasn't plugged in, but last night it was.

When I got to work this morning and opened it up, there was a calendar alert for a morning workout as expected. However, the display didn't switch from landscape to portrait as expected when I folded the screen back. Flipping the display up and back down also didn't change the display. At this point, I tried cancelling the alert--no effect. Likewise, I couldn't pull up the menu or any other application, even though several were running.

After waiting several minutes in hopes it would 'wake up' and getting no response, I resorted to my usual solution when the Zaurus is obstinate: pull the battery and let it sit for a few minutes. This time, however, it wouldn't boot back up when I restored the battery.

I've tried just about everything I could think of--holding ON while pressing power to get the ROM menu elicited not a flicker. The D+M service menu wouldn't come up. After quite a while of surfing, I found reference to the Fn+D+M menu, which DID come up. I've run through the various diagnostic test items there, most of which come up fine. Two areas that problems are reported include NAND and battery.

On page 2/3, item 5, "Low Battery" reports the Main Battery Status as "L" and shows 4.1V. Since the battery is labelled 3.7V, that doesn't seem low. However, selecting "6. Batt Voltage Adjust" and then choosing "2. Battery Voltage Check" tells me it's 2.8V, which would be low.

The NAND Flash (Full) check shows no errors. "NAND Flash (SUM) Checksum reports "Can not read sum area". "NAND Bad Count" reports no bad blocks, but then says "ERROR No Partition Info code=(610)"

Trying to set "Normal Diagnostic Mode" says
Flag = Diag Mode
Writing ...fail!!!

I've taken the opportunity to do a NAND Flash Back Up, and I have found what appear to be Virgin C760 NAND image.

At this point, I have three questions:

1. Is there anything else I can do to diagnose and/or repair without the drastic step of reflashing the NAND image?

2. Will reflashing the NAND image even help? At least one of the many threads I read implied there may be something wrong with the internal power circuitry now, which won't allow anything BUT the Fn-D-M service menu to even load.

3. Is there any way I can get in to extract a file (my master password file) from the current image before I wipe this?

Go to the top of the page
+Quote Post
post May 28 2006, 07:42 PM
Post #2

Group: Members
Posts: 14
Joined: 18-May 06
From: Chicago, IL
Member No.: 9,901

This happened to my C1000 randomly too-- No signs of life, except D+M, no NAND partition info, etc... (Not even a battery charging light!)
I restored the NAND from an image using the D+M menu, and it works-- I'd definitely be worth it to try it on yours too.

Good luck-- I'd be curious to see if it works.

As to getting a file out of the current NAND on the device-- I'm going to say no (can anyone more experienced correct me on this?)-- it seems your NAND is pretty f*ed (It can't even find the partition information correctly!), so I'd doubt there'd be too much that can be recovered. Bite the bullet and restore it.
Go to the top of the page
+Quote Post

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:


RSS Lo-Fi Version Time is now: 22nd July 2014 - 03:38 PM