Jul 2 2008, 05:57 AM
Post
#1
|
|
|
Group: Members Posts: 6 Joined: 1-July 08 Member No.: 21,999 |
All,
My apologies if these questions have been asked before. I just acquired a Zaurus SL-C3200 from Conics (Thanks, Brett!). It has the default Sharp ROM. ROM version is 1.02 JP. English conversion was done by Conics. I am facing 2 problems: 1. When I insert an Ambicom WL1100C-CF card, the card is recognised and the little globe icon appears. However, the little light on the card itself does not turn on. When I try to connect to a network, it fails. I tried the card on a Sigmarion III running WinCE4.1, and after installing drivers, the card worked fine. 2. I am using Win2K. I followed Trisoft's instructions from here for the sync installation. I used the USBDrivers/Network directory from the Sharp CDROM for the drivers. Drivers were installed, and when I plugged the Zaurus in, it was recognised. The NDIS driver shows up in Device Manager. However, as per the instructions, when I try to telnet to the device, or ping it, it fails. Am I doing something wrong ? Or is there a systematic issue that causes both problems ? Please help! -grump6 |
|
|
|
![]() |
Jul 7 2008, 06:07 AM
Post
#2
|
|
![]() Group: Members Posts: 2,350 Joined: 30-July 06 Member No.: 10,575 |
Flashing Cacko is insanely easy:
-Download the files: (somewhere on Tyrannozaurus, still looking) -Backup your Z to a FAT16 SD/CF card (only have one card in the Z): --remove battery and AC --hold D and M --insert AC --find the "nand backup" option --select it --copy the SYSC320.DBK file to somewhere safe -Extract the files to the root of the SD card -Insert SD into the Z -Remove all power again -Insert battery and AC -Hold OK, then hit the power switch. You should have a Japanese menu -Chooses option 4 (flash) -Say "Y" to the warning -Choose SD/CF, whichever you're using -Choose the "flash" option -Reboot into Cacko. I hope that was clear enough. EDIT: Wow, that was unnecessary: http://www.tyrannozaurus.com/old2/?q=cacko There's all you need! (Full version has lots of stuff that can't be removed, more stuff "just works," Lite is Full with stuff taken out that you can reinstall at will). |
|
|
|
grump6 Sl-c3200 : Ambicom Wl1100c Card, Telnet-over-usb Dont Work Jul 2 2008, 05:57 AM
Capn_Fish For the Wi-Fi card, you may want to make sure the ... Jul 2 2008, 06:17 AM
grump6 Thanks for the quick reply, Capn_Fish.
When I do ... Jul 2 2008, 06:39 AM
Capn_Fish Hmm....I would think it's already installed. I... Jul 2 2008, 08:50 AM
deluxe If you care to, flashing with Cacko is quick, it s... Jul 2 2008, 09:07 AM
Capn_Fish Why do I always assume that people don't want ... Jul 2 2008, 09:18 AM
jfv For the wifi, have you set up the network in the n... Jul 2 2008, 09:47 AM
grump6 @Capn_fish:
I'll try the USB networking idea n... Jul 7 2008, 05:33 AM
grump6 @Capn_fish:
I installed Cacko after backing up the... Jul 8 2008, 03:52 PM
Capn_Fish It looks like the VNC viewer for Cacko is called ... Jul 8 2008, 05:25 PM
grump6 @Capn_fish:
I installed your suggested VNC viewer.... Jul 9 2008, 06:08 PM
Capn_Fish Glad to have helped.
It's true that Cacko can... Jul 9 2008, 06:37 PM
grump6 @Capn_fish:
The updated SD driver in question is s... Jul 10 2008, 06:18 AM![]() ![]() |
|
Lo-Fi Version | Time is now: 22nd May 2013 - 05:15 AM |